E-5:;iNNECTlON OF LINK AND BUCKET CYLINDER TOP Remove the stopper fitted to the arm, then remove the wrist link pin. C? kg Wrist link pin: 52 kg * Use a forcing screw (Dia. = 16 mm, Pitch = 2.0 mm) to remove the pin. Raise wrist links @ (%2lN-72-13110 x 4) with a crane, align with the pin holes at the arm end, then push in the pin from the outside. C+l kg Wrist link: 77 kg & Inside of arm bushing: Anti-friction compound (LM-P) Raise front links @ (%21N-72-13120 x 2) with a crane, align with the pin holes of wrist link 0, then push in the separately sent pins @ (z21 N-72- each link is hooked on the pin. 13140 x 2) from the outside of the machine so that & Front link:
160 kg kg Link connecting pin: 52 kg a Inside of bushing: Anti-friction compound (LM-P) Insert O-rings @ (%07000-12130 x 4) in the O-ring grooves of the 2 bushings of each cylinder at the bucket cylinder top. 102