Komatsu — E-8: WORK EQUIPMENT PIPING (BETWEEN CHASSIS AND BOOM)

E-8: WORK EQUIPMENT PIPING (between chassis and boom) Precautions 1) Keep the flanges, O-rings, and heads used during transportation in a safe place so that they can be used again. 2) When connecting the hoses, be careful not to get the O-rings caught. 3) When connecting the hoses, be extremely careful not to let any dirt or dust get into the circuit. Boom seen from above 1. Remove the blind plugs from the piping at the chassis end piping and the boom end piping, then assemble the hoses between the chassis and boom. For bottom dump, arm head: Hose (%07099-01232 x 4). O-ring (%07000- bolt (01010-51245 x 321, washer (01643-31232 13038 x 8).

split flange (07371-51260 x 161, x 32) For bucket, arm bottom : Hose (%07099-01432 x 51, O-ring (%07000- bolt (OIOIO-51455 x 40), washer (01643.31445 13048 x lo), split flange (07371-51470 x 20). x 40) (Use the removed split flanges, bolts, washers, and when installing.) O-rings again. Be careful not to twist the hoses 107