E-29: ADJUSTMENT OF WORK EQUIPMENT CONTROLLER (for automatic control of loading shovel) A Note: 1) As a basic rule, do not adjust the work equipment controller. After installing the potentiometer in the standard condition, carry out automatic horizontal digging and make adjustments only if necessary. 2) See the following pages for the adjustment pro- cedure. 3) Before adjusting, be careful to read properly the “Precautions when adjusting” in Section 3. . control is behind the operator’s seat inside the The controller or the work equipment automatic machine cab. When adjusting the controller, open the door at the front on the left side of the machine cab.
control of work equipment / , ;‘:&r,,“ w Controller for automatic I .\ - View from top \\.-%T- OLSS controller Front of machine f-- r cd- 36 -- T x _& T-t!! Y. pjJj/f?e \cr/-AY View from left side of machine 141