1. Adjustment of controller carried out when installed on machine The controller basically does not need adjustment ever, there are variations in components other than and is set to provide the specified function. HOW- the controller, so it may be necessary to adjust on the machine. The following are examples of where this may be necessary. 2) When replacing the work equipment potentio- 1) When newly assembling the machine ment), and the horizontal digging and bucket meter (or when re-assembling the work equip- angle compensation (option) do not provide the specified performance. Adjust only in these cases.
When replacing the controller, set the controller trimmers VRI - VR7 on the new controller to same position are adjustment trimmers VRI - VR7 on the old controller, then install. 2. Explanation of control box parts 11 LED display windows External appearance of control box 2) Adjustment trimmer window Inside of adjustment trimmer window 0 0 1 1) LED display windows The LED display windows are peepholes to see the four LED lamps showing the operating condition of the controller without opening the cover of the control box. (For details of the LED displays, see TROUBLESHOOTING.) 142