C-l 8: ADJUSTMENT OF HYDRAULIC IDLER CUSHION CYLINDER 1. Check that drain valve @ is completely at the 2. CLOSE position. Check that stop valve @ is open. 3. Operate the right travel lever to the FORWARD and REVERSE positions intermittently (2 - 3 seconds) 3 or 4 times. 4. cylinder plunger is 120 * 3 mm on the left and Check that protrusion @ of the hydraulic cushion 5. right. Close stop valve @ fully. Hydraulic cushion cylinder . -:_ ., . . . .i... ., ., View from top of machine ,L--c--I’ _.-.- .a . -_ w_-- i- . _ View from left side machine 68