D-8: INSTALLATION OF ARM CYLINDER FOOT PIN 1. Remove the stopper fixed to the boom, then re- move the arm cylinder foot pin. 4 kg Arm cylinder foot pin: 70 kg 4 kg Arm cylinder: 1360 kg 2. Raise the arm cylinder, align with holes at the boom 3. Check the clearance between the end of the boom end, then push in the pin. thickness to make the clearance 2 - 3 mm, and boss and the end of the cylinder boss. Select a shim 4. Knock in the arm cylinder foot pin. assemble the shims. 6 Inside of bushing: Anti-friction compound (LM-P) 5. Install the stopper. Parts sent individually Part No. Part Name QW 21N-72-11210 Shim (tl.0) 2 81