00-38 POWER TAKE OFF PTO (WITH OIL PUMP) ASSEMBLY Removal and Installation NPA0084E Legend 1. Drain plug, filler plug 7. Low-pressure hose 2. Bolt (shift cap) 8. High-pressure hose 3. Shift cap 9. Bolt (PTO) 4. Bolt (cable holder) 10. PTO (with oil pump) 5. Cable holder 11. Oil pump 6. Control cable Removal Steps 2. Bolt (Shift Cap) 3. Shift Cap Notice: Set the dump lever inside the cab to the “Down” position and check the lever lock. Remove the bolt and remove the shift cap from the oil pump. 1. Drain Plug, Filler Plug Remove the drain plug and filler plug of the transmission and remove the transmission oil.