00-48 POWER TAKE OFF Legend 1. Gear case Bearings Inspect each bearing, and replace it if the following defects are found. 1) The rotation is not smooth. 2) A remarkable noise is generated. 3) There is damage or rust in the inner and outer laces. 4) There is an abnormal play in the thrust direc- tion. 5) There is discoloration, remarkable wear, or hit- ting on the body of rotation and surface of rota- tion of the needle roller. Notice: If the ball bearing is removed, replace it by a new one. NPA0113E Legend 1. Thrust collar 2. Idle gear 3.
Output gear Shafts Inspect the damage and wear on the external sur- face of each shaft and the wear and damage of the spline portion and replace them if there are remark- able. NPA0112E Legend 1. Needle bearing 2. Ball bearing Gears and Thrust Collar Inspect the tooth surface of each gear and replace what has remarkable wear or damage. Further, correct lightly staged wear or a rough surface with an oil stone. NPA0114E Inspect both surfaces of the thrust collar and re- place the thrust collar if there is a remarkable sur- face roughness or wear. Legend 1. Output shaft 2.
Idle gear shaft Shift Mechanism Inspect each portion of the shift mechanism and re- place it if there is remarkable damage, deflection, or staged wear. 1) Deflection and wear of the shift rod