Steering Lock Shift Lever ACE-019A This model is equipped with a steering lock located at the base of the steering post next to the frame. To lock the steer- ing, turn the handlebar fully left, insert the key into the lock, and turn key coun- terclockwise; then remove the key. To unlock the steering, insert the key into lock and turn the key clockwise; then remove the key. ACE-022A This ATV has a dual-range automatic transmission with reverse. Drive Select Switch (425) Gas Tank Valve (350) The gas tank valve is incorporated in the gas tank. There are three positions: ON, RES, and OFF. In the OFF position, the valve will not allow gasoline to flow to the carburetor.
In the ON position (the normal operating position), gasoline will flow from the tank to the carburetor. In this position, 2.46 L (0.65 U.S. gal.) will remain in the tank as a reserve quantity. conditions, four-wheel drive would be the desired choice. Moving the valve to the reserve (RES) position will allow the operator to use the remaining gasoline in the tank. When turning the valve to any of the three posi- tions, be sure the indicator is pointed directly at the position desired. To either engage or disengage the front wheels, move the switch to the 4WD position or to the 2WD position. ! WARNING Do not attempt to either engage or disengage 4WD while the ATV is moving.
CAUTION Never leave the valve in the ON or RES position when the engine is not running. 37 37 37 37 Division II - Operation/ Maintenance ACE-024B This switch allows the operator to oper- ate the ATV in either two-wheel drive (rear wheels) or four-wheel drive (all wheels). For normal riding on flat, dry, hard surfaces, two-wheel drive should be sufficient. In situations of aggressive trail