OPERATING INSTRUCTIONS Engine Speed Control Engine speed can be manually adjusted using the engine speed control dial, Increase engine speed by rotating the control knob clockwise. Decrease engine speed by rotating the control knob counterclockwise. IMPORTANT The engine speed control system has been set at the factory and should not require adjustment as part of routine maintenance. HAOA690L Figure 39 Mode Selection More efficient work can be done by choosing a proper power and work mode combination, suitable to type of work and conditions. Use the mode selection according to following guide. Power Mode 1.
When the starter switch is turned "ON" the power mode is automatically defaulted to the standard setting. 1 2. Select a proper power mode using button (1, Figure 40) before starting work. 1 2 3. When the power mode button (1, Figure 40) is pressed, a signal sounds, changing the power mode to either "ON" or "OFF". When the power mode is turned "ON", the symbol indicates on the screen. 6 7 FG013733 Deactivate the power mode by pressing it a second time. When the power mode is turned "OFF", the symbol of standard mode indicates on the screen and the power mode returns to the standard mode.
Figure 40 Operation 3-19 DX140R/DX140LCR Mode Selection Point Power Mode • Required to perform heavy work in a short period of time. • Fast speed loading. • Fast speed travel. Standard Mode • General work. • Optimize fuel consumption. Economy Mode • Light work. • Minimize fuel consumption. • Reduce noise.