Doosan DX140R/DX140LCR — Grease Arm and Front Attachment Pins

250 HOUR / MONTHLY SERVICE Perform All Daily and 50 Hour Service Checks Grease Arm and Front Attachment Pins Grease every 10 hours for first 100 hours and every 250 hours thereafter. NOTE: If the unit has been running or working in water the front attachment must be greased on a 10 hour/daily basis. Position machine as shown below and lower the front attachment to the ground and stop engine. Press the grease fitting and inject grease with the grease gun on the marked point After injection, clean off the old grease that has been purged.

B, C, D E F G A Figure 44 FG014482 Reference Number Description Reference Number Description A Boom Cylinder Head Pin (2 Points) E Boom Arm Joint Pin (2 Points) B Boom Foot Pin (2 Points) G Bucket Cylinder Head Pin (1 Point) F Arm Cylinder Rod Pin (1 Point) C Boom Cylinder Rod Pin (2 Points) D Arm Cylinder Head Pin (1 Point) Inspection, Maintenance and Adjustment 4-31 DX140R/DX140LCR