Change Air-Conditioning Outer Filter The unit is equipped with an air filtration system which filters out dirt and dust particles from air being circulated into operator's cabin. This filter must be cleaned out. NOTE: In the unit is being operated in a dusty environment, the cleaning and replacement must be performed more frequently. If filter is damaged, replace damaged filter with a new one. WARNING All service and inspection of air-conditioning system must be performed with the starter switch in the "O" (OFF) position. AVOID DEATH OR SERIOUS INJURY NOTE: All right and left call outs are based on the operator being seated in the operator's seat facing the front. Figure 89 1.
The outer filter is located behind the operator’s seat. 2. Open the cover by the removing knobs (Figure 90). Figure 90 3. Remove filter (Figure 91) and replace with new one. 4. Reassemble in reverse order. Figure 91 DX140R/DX140LCR Inspection, Maintenance and Adjustment 4-52 FG0145 FG0145 FG0145