WARNING AVOID DEATH OR SERIOUS INJURY If there are any sign of leakage while operating transfer pump, inspect the following components to prevent any fires or hazardous fuel spills. Check all hoses leading to and from the transfer pump. Check all hose clamps. Check transfer pump inlet port. The transfer pump is used to transfer fuel from a refueling source to the fuel tank. A check valve is installed in the inlet hose to prevent fuel from flowing back from fuel tank to source. A strainer is installed in inlet hose to prevent any foreign material from being introduced into transfer pump or fuel tank.
A thermal limiter, built into the motor, will automatically shut off power if motor is overheating to protect it from being damaged. Fuel 1 Fuel Tank 4 3 2 5 IN IN OUT OUT Figure 124 FG000161 DX140R/DX140LCR Inspection, Maintenance and Adjustment 4-76 Reference Number Description 1 Body 2 Check Valve 3 Strainer Reference Number Description 4 Strainer Cap 5 Inlet Hose