Komatsu — BUCKET REPLACEMENT AND INVERSION

OPERATION MACHINE OPERATIONS AND CONTROLS 3. Install the bucket inversely. After the bucket is inversed, correct the inclination and direction of the retaining pin holes (1) and (2) and stabi- lize the bucket securely. 4. Align the arm with holes (1) and the link with holes (2), then install grease coating pins (A) and (B). REMARK Install the O-rings into retaining hole (1) of the arm and bucket. When installing the bucket, the O-rings are easily damaged, so fit the O-rings on the boss of the arm end as shown in the dia- gram. When knocking the pin, move the O-ring down to the regular groove. 5. Install the ring plates and stopper pins to each pin.

Add grease through fittings (D), (E), and (F)(total: 5 points) on the bucket link. 3-75