OPERATION TRANSPORTATION Unloading 1. Perform loading and unloading on firm, level ground only. Maintain a safe distance from the edge of a road. 2. Properly apply the brakes on the trailer and put blocks under the tires to ensure that the trailer does not move. Then fix the ramps in line with the centers of the trailer and the machine. Be sure that the two sides are at the same level as one another. Make the slope of the ramps a maximum of 15є. Set the distance between the ramps to match the center of the tracks. 3. Remove the chains or wire rope holding the machine. 4. Start the engine. 5. Set the safety lock lever to the FREE position. 6.
Set the travel speed selector switch to the LOW position. (Except machines with blade specification) Do not operate the travel boost pedal. (Only machines with blade specification) 3-89