Komatsu — LOADING AND UNLOADING WITH TRAILER

TRANSPORTATION OPERATION Securing Machine NOTICE Retract the car radio antenna. To prevent damage to the bucket cylinder during transportation, fit a wooden block at one end of the bucket cylinder to prevent it from touching the floor. Load the machine on to a trailer as follows. 1. Lower the brade. (Only machines with blade specifica- tion) 2. Extend the bucket and arm cylinders fully, then lower the boom slowly. 3. Stop the engine, then remove the key from the starting switch. 4. Lock the control levers securely with the safety lock lever. 5.

Put blocks under both ends of the tracks to prevent the machine from moving during transportation, and tie the machine down securely with chains or wire rope of suit- able strength. Be particularly careful to fix the machine in position securely so that it does not slip to the side. 3-88