TRANSPORTATION OPERATION 3. Lock the lock levers securely. 4. Stop the engine, check that there is nothing around the operator's compartment, then get off the machine. Close the cab door and front glass securely. 5. Pass wire ropes between the 1st and 2nd track rollers from the front and between the 1st and 2nd track rollers from the rear. 6. Set the lifting angle of the wire rope to 30є to 40є, then lift the machine slowly. 7. After the machine comes off the ground, check carefully that the machine is balanced, then lift slowly. Machines With Lifting Hook When lifting the machine, select a flat place and do as follows. For machines with a blade, raise the blade. 1.
Start the engine, then swing the work equipment so that the work equipment is at the rear of the machine (sprocket end). 3-92