Komatsu — LIFTING MACHINE

OPERATION TRANSPORTATION 2. Extend the bucket cylinder and arm cylinder fully, then lower the work equipment to the ground as shown in the diagram on the right using the boom cylinder. 3. Lock the lock levers securely. 4. Install shackles at 3 places to the boom and counter- weight, then use lifting hooks and install the wire ropes so that the lifting angle is less than 60є. 5. When raising the machine, check that there is no change in the posture caused by leakage from the hydraulic cir- cuit at the boom cylinder head end. 6. When the machine leaves the ground, stop for a moment and wait for the machine to stabilize, then continue the lifting operation slowly. 3-93