Komatsu — COOLING FAN BELT TENSION-INSPECT/ADJUST

MAINTENANCE MAINTENANCE PROCEDURE Adjustment For machines equipped with air conditioner, see "V-belt Tension - Inspect/Adjust(PAGE 6-14)". Prepare the following. Prepare a bar. Prepare a wooden block. Adjust the fan belt tension. 1. Insert a bar between alternator (1) and the cylinder block to fix alternator (1) in position. When fixing alternator (1) in position, insert a wooden block between the bar and alternator (1) to prevent any damage to the alternator. 2. Loosen bolts (2) and (3). 3. Move alternator (1) so that the deflection of the belt is approx. 8 mm(0.3 in) (approx. 58.8 N (6 kgf)). 4. Tighten bolts (2) and (3) to fix alternator (1) in position.

NOTICE Check each pulley for damage, wear of the V-groove, and wear of the V-belt. In particular, be sure to check that the V-belt is not touching the bottom of the V- groove. If the belt is stretched and there is no allowance for adjustment, or if it is cut or cracked, please contact your Komatsu distributor for replacement. 4-59