Komatsu — CHANGE OIL IN ENGINE OIL PAN,REPLACE ENGINE OIL FILTER CARTRIDGE

MAINTENANCE PROCEDURE MAINTENANCE EVERY 500 HOURS MAINTENANCE Maintenance for every 50, 100 and 250 hours service should be carried out at the same time. Change Oil In Engine Oil Pan, Replace Engine Oil Filter Cartridge WARNING The parts and oil are at high temperature after the engine is stopped, and may cause serious burns. Wait for the temperature to go down before starting the operation. Container to catch drained oil: Min. 10.5 liters Refill amount: 10.5 liters (2.77 US gal, 2.31 UK gal) Prepare a filter wrench. 1. Set a container to catch the oil immediately under the drain plug (P) at the bottom of the machine. 2.

Remove drain plug (P) slowly to avoid getting oil on your- self, and drain the oil. 3. Check the drained oil, and if there are excessive metal particles or foreign material, please contact your Komatsu distributor. 4. Install drain plug (P). 5. Open the engine hood, then using a filter wrench, turn fil- ter cartridge (1) counterclockwise to remove it. REMARK Put a cloth in contact with the notched part of the oil container guide. This makes it possible to prevent the area around the fil- ter holder from becoming dirty. 6. Clean the filter holder, then coat the thread and the packing portion of the new filter cartridge with clean engine oil (or coat thinly with grease), and install. 4-60