MAINTENANCE MAINTENANCE PROCEDURE NOTICE Check that the old packing is not stuck to the filter holder. If there is any old packing, it will cause oil leakage. 7. After bringing the packing surface into contact with the seal surface of the filter holder, tighten it a further 1/2 turns. 8. After replacing the filter cartridge, add engine oil through oil filler (F) until the oil level is between the H and L marks on the dipstick (G). 9. Run the engine idle for a while, then stop the engine and confirm that the oil level is between the H and L lines according to "Engine Crankcase Oil Level - Check/Add (PAGE 3-37)". 4-61