Komatsu — SWING CIRCLE-LUBRICATE

MAINTENANCE MAINTENANCE PROCEDURE Swing Pinion Gear Oil Level - Check/Add Prepare a scale. 1. Remove bolts (1) (2 bolts) on the front of the revolving frame and remove cover (2) . 2. Remove bolts (3) (2 bolts) on the top of the revolving frame and remove cover (4) . 3. Insert a scale into the grease and check that the height of the grease in the portion where the pinion passes is at least 20 mm (0.8 in). Add more grease if necessary. 4. Check if the grease is milky white. If it is milky white, it is necessary to change the grease. Please contact your Komatsu distributor. The total amount of grease is 5 liters (4.5 kg) (1.3 US gal, 1.1 UK gal [9.9 lb]). 5. Install cover (4) with bolts (3) .

6. Install cover (2) with bolts (1) . Swing Circle - Lubricate 1. Lower the work equipment to the ground. 2. Using a grease pump, pump in grease through the grease fittings shown by arrows. 3. After greasing, wipe off all the old grease that was pushed out. 4-63