Komatsu — 12.15.1 LIFT ARM OPERATION (LEVER)

OPERATION 12.15 OPERATION OF WORK EQUIPMENT (WITH MATERIAL HANDLING ARM) Work equipment control lever (1) can be used to operate the lift arm and fork as follows. 12.15.1 LIFT ARM OPERATION (LEVER) (1) RAISE ( ) (2) HOLD ( ): The lift arm is kept in the same position. (3) LOWER ( ) (4) FLOAT ( ): The lift arm moves freely under external force. When the lift arm control lever is pulled further from the raise position, the lever is stopped in this position until the lift arm reaches the preset kick-out position, and the lever is return to hold position NOTICE: Do not use the FLOAT position when lowering the material handling arm. 2-57