OPERATION NOTE: Visually check for engagement of the coupler plungers by lifting coupler into view. 12.16.2 UNCOUPLING FROM THE ATTACHMENT 1. Tilt back the attachment and coupler. Continue to hold the tilt control lever in the full tilt back position while pushing the coupler switch into the “UNLOCK” position. Hold the switch until the coupler plungers are fully retracted. 2. Continue to hold the coupler switch in the “UNLOCKED” position. Lower the attachment until it rests securely on the ground. 3. Continue to hold the coupler switch in the “UNLOCKED” position. Slowly tilt the coupler forward and lower it away from the attachment hooks. Slowly back away from the attachment.
Release the coupler switch. 2-59