Komatsu — 12.17.7 MULTI-PURPOSE BUCKET

OPERATION 5. When finishing a non-solid material, position the bucket as shown, and backdrag the loose material. Note: This method is not recommended where abrasive material is common. 6. By placing the multi-purpose bucket in the scraper position and opening the clam slightly, spreading of material can be done on the “run”. The amount of spread can be controlled by the amount of clam opening. 7. When clearing trees, raise the bucket high to gain leverage and make contact gently to reduce possible harm to the operator and equipment. The bucket must be positioned with the bottom parallel with the ground. DO NOT push with the top of the bucket.

WARNING When using the machine for site clearing and tree removal, protect the operator from trees and branches. 8. When transporting trees or other large objects, always balance the load as shown. Balance the load when picking it up to prevent twisting the boom assembly and linkage. 2-67