OPERATION DIGGING, CLEARING, AND LEVELING 1. With the clam fully open, the multi-purpose bucket can be used as a bulldozer. Position the bucket as shown for digging. Note: When the ground is hard or frozen and the area must be ripped before it can be worked, rip a relatively small section and work it to grade before enlarging the cut. This will require ripping each section only once, not every morning after the ground has refrozen. To prevent breaking or bending scarifier teeth, never turn the loader while the scarifier teeth are in the ground. 2. Position the bucket as shown for level grading. 3. Position the bucket as shown for spreading or to obtain a lesser cut. 4.
When clearing a rocky area, remove the small and loose rocks first, large and solid rocks can be lossened and moved with less difficulty. When loosening large or solid rocks, greater force and penetration can be obtained by digging under the rock (as shown below) with the bucket. Lifting the rock with the bucket while pushing will increase traction and reduce wheel spinning. 2-66