Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL [b] With the crankshaft fully installed, measure the end play (lateral runout) of the crankshaft. Refer to section 1.9.2.3. 1.9.2.2 Crankshaft Radial Play Checking Check the crankshaft radial play as follows: 1. Clean the bearing races in the crankcase (cylinder block) and the bearing seats in the bearing caps with a chamois. NOTE: The center bearing shell halves must be mounted in the center crankcase race and bearing cap (fourth from either end). 2. Install the upper bearing shell on the bearing race in the crankcase. The locking lugs of the bearing shells must fit into the slots in the crankcase races. See Figure 1-51. 1. Crankcase Race 3. Cylinder Block 2.

Upper Bearing Shell 4. Bearing Shells Locking Lug Figure 1-51 Installing the Upper Bearing Shell All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-71