Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

1.9 CRANKSHAFT ASSEMBLY 3. Check the width of the center main bearing shell. If damage or cracks are present, replace the crankshaft. See Figure 1-58. Figure 1-58 Measuring the Width of the Center Main Bearing Shell NOTE: To obtain a correct value for crankshaft end play, the width of each bearing shell and its corresponding journal must belong to the same repair stage (both must be "Standard," "Undersize - 0.020 inch," etc.). 4. Calculate the end play, or axial play, (fore-to-aft movement) of the crankshaft. If the end play is less than 0.190 mm (0.0074 inch), or more than 0.322 mm (0.0127 inch) as listed in Table 1-19, then replace the crankshaft.

Table 1-19 Crankshaft End Play [a] For the center main bearing journal, note the width (thickness) of the bearing journal. Example: W m = 1.8120 inches. [b] For the center main bearing shell, note the width (thickness) of the bearing shell. Example: W s =1.8030 inches. All information subject to change without notice. 1-78 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Description mm (inch) End Play (Axial Play) Measured at Center Bearing Journal 0.190-0.322 (0.0074-0.0127)