1.17 PISTON, PISTON RING, AND CONNECTING ROD 21. Install the engine in the vehicle. 1.17.3 Piston Ring Replacement Replace the piston ring as follows: 1. Remove the piston. Refer to section 1.17.1. 2. Remove the rings, using suitable ring pliers. Remove the rings in order, starting from the top of the piston down. See Figure 1-89. See Figure 1-90. 1. Keystone Piston Ring (Groove I) 3. Double Chamfered Oil Control Ring with Garter Spring (Groove III) 2. Taper Face Ring with Internal Angle (Groove II) 4. Piston Figure 1-89 Piston Rings All information subject to change without notice. 1-116 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION