Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL NOTICE: Do not attempt to straighten the connecting rod. This could result in severe engine damage. 4. Inspect the connecting rod for twisting and dimensional tolerance. see Figure 1-98. If any value exceeds those listed in Table 1-28, , replace the connecting rod. Figure 1-98 Connecting Rod Measurements Table 1-28 Connecting Rod Dimensional Tolerances [a] On each side of the connecting rod, measure the length of the connecting rod (Dimension A in see Figure 1-98) : the distance from the center bearing bore (big-end All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-125 Description Dimensions:

mm (inch) Length of Connecting Rod 255.970-256.030 (10.0775-10.0799) Basic Bore Diameter for Connecting Rod Bearings 99.000-99.022 (3.8976-3.8985) Maximum Permissible Out-of-Round in Bearing Bore 0.01 (0.0004) Maximum Permissible Out-of-Round in Bushing Bore 0.01 (0.0004) Maximum Difference in Axial Parallelism Between Bearing Bore and Bushing Inner Surface 0.030 (0.0012) Width of Connecting Rod (at big end) 44.308-44.370 (1.744-1.7468) Width of Connecting Rod Journal 44.5-44.6 (1.75-1.76) Distance from Connecting Rod Center Line for Measuring Parallelism 50 (2)