Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

1.17 PISTON, PISTON RING, AND CONNECTING ROD 11. Calculate the connecting rod radial play (up-and-down movement) at the bearing journal. If the radial play is less than 0.054 mm (0.0021 in.), or more than 0.116 mm (0.0046 in.), replace the connecting rod. Listed in Table 1-32is the radial play. Table 1-32 Connecting Rod Radial Play [a] For each connecting rod, note the average value for the bearing bore diameter, as calculated. Example: D s = 3.5421 inches. [b] For each bearing journal, note the average value for the bearing journal diameter, as calculated. Example: D j = 3.5391 inches. [c] From the value for the bearing bore diameter, subtract the value for the bearing journal diameter.

This result is the radial play. Example: D s j = 0.0030 inch. NOTE: In the above example, both measurements belonged to repair stage "undersize 0.1 mm." 12. Remove the bearing cap from the connecting rod. 13. Install the piston. Refer to section 1.17.2. All information subject to change without notice. 1-132 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Description Dimensions: mm (inch) Radial Play 0.054 - 0.116 (0.0021 - 0.0046)