Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 1.17.4 Connecting Rod Bushing Replacement Replace the connecting rod bushing as follows: NOTICE: Be careful to avoid damaging the bushing bore when removing the bushing. A damaged connecting rod can seize up suddenly, causing major engine repairs. 1. Rest the connecting rod on a flat surface. Using an appropriate drift, press the bushing out of the connecting rod. See Figure 1-103. 1. Bushing 2. Connecting Rod Figure 1-103 Remove the Bushing 2. Check the bushing bore in the connecting rod. If surface material is missing from the bushing bore, replace the connecting rod. All information subject to change without notice.

6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-133