Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

1.20 EGR VALVES Valve seat height (D) Valve seat width at the valve head (E) Valve seat angle (F) Valve length (G) Figure 1-125 Critical Dimensions, Valve Stem and Head for EGR Engines Table 1-44 Valve Removal/Installation Specifications in mm (in.) for non-EGR and EGR engines All information subject to change without notice.

1-162 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Description Intake, mm (in.) Exhaust-EPA 98, mm (in.) Exhaust-EPA 04, mm (in.) Valve stem diameter (A) 8.935-8.950 (0.3518- 0.3524) 8.925-8.940 (0.3514- 0.3520) 8.925-8.940 (0.3514- 0.3520) Valve seat diameter at head contact surface (B) 42.0 (1.65) 39.0 (1.54) 39.0 (1.54) Valve head diameter (C) 45.4-45.6 (1.79-1.80) 40.9-41.3 (1.61-1.63) 41.9-42.3 (1.65-1.67) Valve seat height-new (D) 3.1-3.3 (0.12-0.13) 2.8-3.1 (0.11-0.12) 3.0-3.3 (0.12-0.13) Minimum valve seat height-after grinding (D) 2.9 (0.11) 2.3 (0.09) 2.9 (0.11) Valve seat width at valve head (E) 3.5-4.5 (0.14-0.18) 3.5-4.5 (0.14-0.18) min.

3.5 (0.14) Valve seat angle (F) 30 degrees 45 degrees 36 degrees Valve length (G) 145.0 (5.71) 145.0 (5.71) 145.0 (5.71)