Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

1.22 CAMSHAFT AND CAMSHAFT SENSOR 2. Measure the diameter of each bearing journal. Measure the diameter of the bushing at each journal. See Figure 1-136. 1. Camshaft Gear 2. Dial Gauge Figure 1-136 Measuring the Cam Rise 3. Mount the camshaft at the outer journals. NOTE: For all of the following steps, use a dial gauge. 4. Measure the radial runout of the cam basic circle. 5. Measure the cam rise of the intake valve cams. See Figure 1-136, Ref. I. 6. Measure the cam rise of the exhaust valve cams. See Figure 1-136, Ref. E. 7. Measure the cam rise of the unit pump valve cams. See Figure 1-136, Ref. U. All information subject to change without notice.

1-178 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION