MBE 4000 SERVICE MANUAL 8. Replace the camshaft if any of the measurements do not meet the specifications listed in Table 1-50. Table 1-50 Camshaft Specifications All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-179 What To Measure Where To Measure Value:
mm (inch) Unless otherwise noted Hardness of Surface At Cams and Journals 57–63 HRC Camshaft Radial Runout When Mounted on Outer Bearing Journals At Gear Seat 0.020 (0.0008) Camshaft Radial Runout When Mounted on Outer Bearing Journals At Cam Circle 0.025 (0.0010) Camshaft Radial Runout When Mounted on Outer Bearing Journals At Camshaft Journals 0.030 (0.0012) Minimum Valve Cam Rise–Above Basic Circle Intake Valve 7.3 (0.29) Minimum Valve Cam Rise–Above Basic Circle Exhaust Valve 8.2 (0.32) Camshaft Journal Diameter For New Camshaft 81.893–81.928 (3.2241–3.2255) Bushing Diameter At Camshaft Journals 82.000–82.035 (3.2283–3.2297) Gear Back Lash Cam Gear to Crank Gear 0.074–0.176 (0.0029–0.0069) Gear Back Lash Cam Gear to Air Compressor Gear 0.082–0.168 (0.0032–0.0066)