Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL Cylinder Head The cylinder head warpage limits are listed in Table 1-52. The specifications for measuring cylinder liner protrusion are listed in Table 1-53. Cylinder head bolt length is listed in Table 1-54. The tightening stages for cylinder head bolts are listed in Table 1-55. Oil pressure readings are listed in Table 1-56. Cylinder head torque values are listed in Table 1-57. Cylinder head specifications are listed in Table 1-58. The specifications for compression testing are listed in Table 1-59 and listed in Table 1-60.

Table 1-52 Head Warpage Limits Table 1-53 Specifications for Measuring Cylinder Liner Protrusion Table 1-54 Cylinder Head Bolt Lengths Table 1-55 Tightening Stages, Cylinder Head Bolts Table 1-56 Oil Pressure Readings All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-185 Description Limit Over a length of 150 mm (6 in.) 0.015 mm (0.0006 in.) Description Value: mm (inch) Cylinder Liner Protrusion from block 0.2305-0.330 mm (0.0090-0.0130 in.) Difference between the four measuring points Max.: 0.02 mm (0.0007 in.) Description Length Shaft length when new 210.0 mm (8.27 inches) Maximum shaft length 212.0 mm (8.35 inches) Size Max.

Shaft Length Tightening Stage Torque Value (Repair work in the field) M15 x 2 212.0 mm (8.35 in.) Stage 1 10 N·m (7 lb·ft) Stage 2 50 N·m (37 lb·ft) Stage 3 100 N·m (74 lb·ft) Stage 4 200 N·m (148 lb·ft) Stage 5 90 more Stage 6 90 more Description Minimum Oil Pressure Reading Engine at Idle Speed 50 kPa (7 psi) Engine at Max. rpm 250 kPa (36 psi)