Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

Table 1-57 Cylinder Head Torque Values Table 1-58 Cylinder Head Specifications Table 1-59 Compression Pressure Test Data Table 1-60 Tensioning Arm Bolt Torque Values All information subject to change without notice.

1-186 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Description Torque Value Exhaust Manifold Bolts 50 N·m (37 lb·ft) High-Pressure Fuel Injector Lines 25 N·m (18 lb·ft) Inspection Cover on Flywheel Housing 25 N·m (18 lb·ft) Rocker Arm Mounting Bolts 60 N·m (44 lb·ft); then another 90 What To Measure How To Measure mm (inch) Maximum Permissible Warpage of Head Mating Surface Lengthwise and Diagonally 0.015 (0.0006) Maximum Permissible Parallelism Deviation of Head Mating Surface At Each of the Four Corners 0.1 (0.004) Overall Height of Cylinder Head When New 113.85-114.15 (4.482-4.494) After Machining 113.5 (4.46) Description Pressure in kPa (psi) Minimum Compression Pressure Valve 2800 (406) Permissible Difference Between Individual Cylinders 400 (58) Description N·m (lb·ft) Tensioning Arm Bolts 50 (37)