Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

2.3 FUEL INJECTOR LINE FIRE To avoid injury from fire, keep all potential ignition sources away from diesel fuel, including open flames, sparks, and electrical resistance heating elements. Do not smoke when refueling. FIRE To avoid injury from fire caused by heated diesel-fuel vapors: Keep those people who are not directly involved in servicing away from the engine. Stop the engine immediately if a fuel leak is detected. Do not smoke or allow open flames when working on an operating engine. Wear adequate protective clothing (face shield, insulated gloves and apron, etc.). To prevent a buildup of potentially volatile vapors, keep the engine area well ventilated during operation. 1.

Remove the engine trim cover. NOTE: The MBE 4000 engine has individual heads for each cylinder. To remove the injector line for one cylinder, do these procedures step by step. To remove all the injector lines, repeat each step in these instructions, as applicable, for all six cylinders. 2. Remove the cylinder head cover for each cylinder head, as required. Refer to section 1.1.1. All information subject to change without notice. 2-14 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION