MBE 4000 SERVICE MANUAL 3. Before loosening the injector line nuts, check the thrust bolt for tightness, using the thrust bolt torque wrench adaptor, (J 45063). 1. Injector Line Nut, Unit Pump Fitting 3. Injector Line Nut, Transfer Tube Fitting 2. Injector Line 4. Thrust Bolt Figure 2-9 High-Pressure Injector Line Removal / Installation 4. Using the injector line torque wrench adaptor (J 45062), loosen the injector line nuts at the transfer tube and at the injector unit pump. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 2-15