2.5 EGR FUEL INJECTOR NOZZLE 2.5 EGR FUEL INJECTOR NOZZLE The removal and installation procedures remain the same for the non-EGR and EGR fuel injector nozzle. There are minor differences in the injector nozzles for the two engines. The EPA 98 engine uses injector nozzle #1070 until engine series number 744382 and from engine series number 744383 on, the 98 engine uses injector nozzle #1281. The EPA 04 EGR engine now has two injector nozzles – one for low HP and the other for high HP. Each injector nozzle is stamped with a production number for the EPA 98 and EPA 04 engines. See Figure 2-14. Figure 2-14 Injector Nozzle Identification NOTICE:
EPA 98 injector nozzles may not be used in an EPA 04 EGR engine. Verify correct nozzle before insertion into engine. NOTE: There is no fuel return hole on EPA 04 EGR fuel nozzles. All information subject to change without notice. 2-24 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION