Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

2.8 FUEL HEAT EXCHANGER 2.8.2 Fuel Heat Exchanger Installation Install the fuel heat exchanger as follows: 1. Attach the fuel heat exchanger to the DDEC-ECU control unit with the mounting bolts. Tighten the bolts 8 N·m (6 lb·ft). 2. Connect the fuel lines to the fuel heat exchanger. Use new seal rings. Tighten the fuel lines 50 N·m (37 lb·ft). 3. Close the hood. 4. Connect the batteries. 5. Prime the fuel system. Refer to section 2.9.2. All information subject to change without notice. 2-36 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION