2.11 FUEL PUMP PERSONAL INJURY To avoid injury from the sudden release of a high-pressure hose connection, wear a face shield or goggles. 2. Remove the fuel lines from the fuel pump. Discard the seal rings on the banjo fitting. See Figure 2-24. 1. Fuel Pump 3. Banjo (Hollow-Core) Bolt 2. Banjo Fittings Figure 2-24 Fuel Lines at the Fuel Pump NOTE: Catch any fuel that runs out of the fuel pump or the fuel lines. 3. Remove the socket-head bolts attaching the fuel pump to the cylinder block. Discard the gasket. 4. Slowly remove the fuel pump from the engine, taking care not to damage the splined shaft on the fuel pump. 5. Discharge the fuel pump gasket.
All information subject to change without notice. 2-44 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION