Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 2.11.2 Fuel Pump Installation Install the fuel pump as follows: NOTICE: When inserting the fuel pump into the opening in the cylinder block directly behind the front camshaft cover, be careful not to damage the splined shaft of the pump. 1. Install the fuel pump on the cylinder block. See Figure 2-25. 1. Splined Shaft 2. Fuel Pump Figure 2-25 Fuel Pump Shaft [a] Install a new gasket on the connection to the cylinder block. [b] Work the splined shaft slowly and carefully into the opening in the cylinder block until it meshes with the camshaft drive gear. [c] Install and tighten the three socket-head bolts that attach the fuel pump to the cylinder block.

Tighten the socket-head bolts 25 N·m (18 lb·ft). All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 2-45