Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

2.12 FUEL SYSTEM INSPECTION 2.12.1 Performing a Fuel Pressure Test Perform the following steps to conduct a fuel pressure test: 1. Install the pressure gauge on the fuel system. There are two possible setups for this installation. Setup 1 has the gauge installed after the fuel filter. See Figure 2-26. Setup 2 has the gauge installed before the fuel filter. See Figure 2-27. 1. Fitting 4. Fuel Outlet Line 2. Fuel Filter Housing 5. Unit Pump 3. Mechanical Gauge Figure 2-26 Gauge Installation After the Fuel Filter All information subject to change without notice. 2-48 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION