Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 5. Remove the bolt and gear. See Figure 2-29. 1. Cover 3. Fuel Pump Shaft 2. Drive Gear Mounting Bolt 4. Fuel Pump Drive Gear Figure 2-29 Removing/Installing Fuel Pump Drive Gear and Bolt 6. Check the mounting between bolt, gear, and shaft. Look for damaged parts. Replace any damaged part in order to avoid it coming loose again. 7. Install gear and bolt. Apply Loctite ® 271 sealant to the bolt. For the correct tightening of the bolt, install the special tool J 36187 to the fuel pump spline and block the shaft movement. See Figure 2-28. 8. Torque bolt to 30 N·m (22 lb·ft). 9. Apply Loctite 574 sealant and install the cover. Torque 50 N·m (37 lb·ft). 10.

Install new gasket and the fuel pump. Torque to the fuel pump bolts will be 25 N·m (18 lb·ft). All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 2-55