MBE 4000 SERVICE MANUAL 2.A ADDITIONAL INFORMATION Description Page SPECIFICATIONS ............................................................................................. 2-57 Fuel Injectors .................................................................................................. 2-57 Engine Brake Harness ................................................................................... 2-58 Fuel and Fuel Control ..................................................................................... 2-59 Fuel System Inspection ..................................................................................
2-64 SPECIFICATIONS This section contains the specifications for servicing the engine. Fuel Injectors The fuel injection system torque values are listed in Table 2-4. The torque values for the injector lines are listed in Table 2-5. Table 2-4 Fuel Injection System Torque Values Table 2-5 Injector Lines Torque Values All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 2-57 Fastener Type N·m (lb·ft) Fuel Filter Cap Nut 25 (18) Fuel Return Line Fittings (at fuel gallery inlet) 50 (37) Hollow-Core Banjo Bolts 50 (37) Pressure Limiting Valve (at fuel gallery outlet) 50 (37) Protective Sleeve 45 (33) Tensioning Arm Retaining Bolt 50 (37) Unit Pump Mounting Bolts 65 (48) Fastener Type N·m (lb·ft) Using a 12-in. torque wrench Using a 24-in. torque wrench Required Torque on Fastener Injector Line Nuts 27 (20) 25 (18) 30 (22) Transfer Tube Thrust Bolt 40 (30) 36 (27) 45 (33)