Engine Brake Harness The former 8-pin Engine Harness Connector is identified with part number A460 150 00 33, and it is used in the engines that have one solenoid air valve for the engine brakes. Beginning with the engine serial number 739080, these current engines will have an 8-pin Engine Harness Connector with part number A460 150 01 33. The changes in the harness connections between the former and current 8-pin harness connector are Listed in Table 2-6and listed in Table 2-7. Table 2-6 Former Harness Connector A460 150 00 33 Table 2-7 Current Harness Connector A460 150 01 33 All information subject to change without notice.
2-58 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Description 8-Pin Engine Harness Connector DDEC-ECU 55-Pin Connector Fan Control 1, switch to Bat- (PV3) A 41 Fan Control 2, switch to Bat- (PV4) B 43 Output Ground (PV) C 11 Fan and Wastegate/E-Flap Voltage Supply (PV1, 3, 4) D 12 Exhaust Flap/Wastegate Control, switch to Bat- (PV1) E 51 Fan and Wastegate/E-Flap Voltage Supply (PV1, 3, 4) F 12 Turbo Brake Control, switch to Bat- (PV6) G 40 Turbo Brake Voltage Supply (PV6) H 42 Description 8-Pin Engine Harness Connector DDEC-ECU 55-Pin Connector Fan Control #1, switch to Bat- (PV3) A 41 Fan Control #2, switch to Bat- (PV4) B 43 Compression Brake Control, switch to Bat- (PV2) C 50 Fan and Wastegate/E-Flap Voltage Supply (PV1, 3, 4) D 12 Exhaust Flap/Wastegate Control, switch to Bat- (PV1) E 51 Compression Brake Voltage Supply (PV2) F 52 Turbo Brake Control, switch to Bat- (PV6) G 40 Turbo Brake Voltage Supply (PV6) H 42