Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 6. Remove the standoff bracket attaching the dipstick guide tube to the oil fill tube. See Figure 3-3. 1. Dipstick 5. Connector 2. Oil Fill Cap 6. Dipstick Clamp 3. Locknut 7. Oil Fill Tube Clamp 4. Flatwasher 8. Bolt Figure 3-3 Standoff Bracket (exploded view) 7. Remove the dipstick guide tube, adaptor, and seal. Clean the guide tube and discard the seal. 8. Remove the oil fill tube. [a] Remove the bolt that fastens the oil fill tube retainer to the cylinder block. [b] Remove the oil fill bolts and washers that fasten the oil fill tube to the oil pan. Save the bolts and washers. [c] Remove and discard the gasket on the oil fill tube.

Clean the contact surfaces of the fill tube and the oil pan, removing all traces of gasket material. [d] Clean the oil fill tube. 9. Remove the oil pan from the cylinder block. 10. Remove and discard the oil pan gasket. Save the bolts. 11. Thoroughly clean the pan. Remove all traces of gasket material from the pan and from the block. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 3-5