Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 4. Inspect the oil spray nozzle. If damaged or bent, replace it or repair it using the oil spray nozzle setting device (J 46182 or 460 589 00 23 00). See Figure 3-8. 1. Oil Spray Nozzle 3. Setting Device 2. Setting Rod 4. Retaining Bolt Figure 3-8 Setting the Oil Spray Nozzle [a] Secure the setting device (J 46182 or 460 589 00 23 00)in a vise with protective jaws. [b] Install the oil spray nozzle on the setting device and tighten the retaining bolt enough to hold the nozzle firmly. [c] Set the nozzle so that the tip of the nozzle fits, without tension, into the cup of the setting rod. If necessary, bend the nozzle gently until it fits easily.

All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 3-11