Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

3.2 OIL SPRAY NOZZLE 3.2.2 Oil Spray Nozzle Installation Install the oil spray nozzle as follows: 1. Install each nozzle in the block with the locator pin correctly installed. See Figure 3-9. Tighten the hollow-core bolt 40 N·m (30 lb·ft). 1. Pin Seat 2. Locator Pin Figure 3-9 Installing the Oil Spray Nozzle NOTE: The locator pin on the base of the oil spray nozzle must be inserted into the pin seat in the cylinder block until it engages. 2. Install the oil pan. Refer to section 3.1.2. 3. Fill the crankcase to the specified oil level. Do not overfill the crankcase. All information subject to change without notice. 3-12 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION